
Page 16 (Revision 1.0) Copyright © 2018 GeeTramp® All Rights Reserved.
USER INSPECTION CHECKLIST
A Mini Tramp in poorly maintained condition will increase your risk of getting injured. Please inspect the
Mini Tramp before each use, check for damaged or worn parts, for example:
Date of inspection: / /
or X
Mini Tramp Positioning
Mini Tramp is positioned on a stable & level surface (e.g. grassed or padded surface)
Mini Tramp is positioned on a surface
that’s
not too hard (e.g. not concrete)
Mini Tramp is positioned a minimum of 5m away from any surrounding hard surfaces
and other potential hazards (e.g. walls, fences, clotheslines and trees)
Adequate clearance is provided above the Mini Tramp bed (minimum 5m)
Mini Tramp not positioned under other hazards (e.g. power line, tree branches etc.)
The space under the Mini Tramp is clear of objects (e.g. branches, toys etc)
Mini Tramp Frame
Frame is in good condition (e.g. not bent or broken, no rust or corrosion)
Legs are fully pinned and at the correct angle for intended use.
Joints are in good condition (e.g. no signs of stress, cracks, rust or corrosion)
Frame does not present sharp protrusions or edges
Mini Tramp Suspension System
Suspension system is in good condition (e.g. springs are not over stretched or damaged,
not bent or broken, no rust or corrosion)
Suspension system is complete (e.g. all springs are present and connected)
Suspension system does not have sharp protrusions or edges
Mini Tramp bed (jumping mat surface)
Bed is in good condition (e.g. no punctures, tears, holes, sagging or other damage)
Fabric and stitching of the bed is in good condition
Padding
Padding is correctly installed & securely attached to exposed framework & mat edges
Padding is in good condition (e.g. no punctures, tears, holes or other damage)
Stitching of padding fabric and securing is in good condition
Any items mar
ked “X” requires maintenance, repair or modification (e.g.
repositioning, etc.).
Refer to the instruction manual or contact the supplier for further information.
Warning: If any of the above problems are present or any additional problems arise that
could cause the user harm then the Mini Tramp should not be used until the problem is
rectified.