GS120-MAN-14V05 (0307)
Copyright © 2014 Gedge Systems
25
s w 1 6 3 8 9 , S t o p *
s
Start character
w
Write command
1 6 3 8 9
Register address for a text write
,
Separator character
S t o p
Text string you want on the display
*
End character
If the text string is ≤ 8 characters long
, the text will be displayed for 3 seconds and
then the display will return to the numeric sum value.
If the text string is > 8 characters long
, the text will start scrolling across the display
until it is fi nished, and then the display will return to the numeric sum value. Text
strings cannot be greater than 100 characters in length.
The GS120 has a 7 segment display designed for numeric digits
. Because of this,
some alphabet and special characters are diffi
cult to display, and a combination of
upper and lower case letters are used.
The characters “M” and “W” each require 2 digits to display. Also the “Q” looks
similar to “9” and the “K” looks similar to a capital “H” (“h” is always displayed in
lower case). Some punctuation characters are not supported.
