GH10TA USER MANUAL
PAGE
7
Issue I
July 2017
5.
QUICK START
To quickly start the GH10TA Controller, perform the following actions:
1.
Touch keyboard calibration.
After connecting the controller to the power supply, the controller for about 4 seconds calibrates the
touch keyboard.
During calibration you can not bring your hands to the sensors, because it would cause
incorrect calibration, and consequently malfunction of the keyboard.
After calibration process, the device
performs a 3-second start sequence, during which it displays various information, including the firmware
version. When the start sequence is complete, the controller goes into the STANDBY mode. If the keyboard
does not work correctly, you should repeat the calibration process. To do this, disconnect controllers and
then connect the controller to a power supply and calibrate the keyboard touch one more time,
remembering not to put your hands to the sensors.
.
2.
Connect the device to the 230V AC power system (put the plug in the power outlet).
⇒
3.
Turn the Controller ON by pressing
. Screen appears: