REAR PANEL
10. ROTARY SPEAKER SPEED / DEFEAT CONNECTOR
A ¼” TRS input for connecting an optional PUSH ON/PUSH OFF foot switch for remote defeat of all effects
except ROTARY SPEAKER. This defeat feature mutes the INPUT to the effects processor and thereby
allows reverb tails (and other similar effects) to fade normally. When the ROTARY SPEAKER preset is
selected, the foot switch selects the ROTARY SPEAKER speed and allows morphing between the
low
and
high
speeds.
11. AUDIO OUTPUTS (RIGHT AND LEFT/MONO)
¼” LEFT/MONO and ¼” RIGHT OUTPUT connectors. For MONO operation, use the LEFT/MONO OUTPUT,
which passively sums the STEREO image from the two OUTPUTS into the LEFT/MONO OUTPUT (as long
as nothing is plugged into the RIGHT OUTPUT connector).
12. AUDIO INPUTS (RIGHT AND LEFT/MONO)
¼” LEFT/MONO and ¼” RIGHT INPUT connectors. For MONO operation, use the LEFT/MONO INPUT,
which splits the LEFT INPUT into the RIGHT signal chain (as long as no signal is plugged into the RIGHT
INPUT connector).
13. AC ADAPTOR INPUT
This unit utilizes an AC adaptor for power. Connect the adaptor to the proper voltage as indicated on the
adaptor housing. Insert the barrel plug end into the AC ADAPTOR INPUT of your unit. If the adaptor is lost or
damaged, replace it with an adaptor of the same input and output ratings.
WARNING:
If your original power adaptor must be replaced, consult your GECKO®
dealer to get the correct replacement. Failure to use the correct power supply may
result in fire, shock hazard, decreased performance, non-operation, and extensive
damage which is not covered by the warranty.
______________________________________________________________________________________
4
4
© GECKO MUSIC GROUP. All Rights Reserved.
10
13
11
12