Gecko UTOPIA DSP 2206, Owner'S Manual

Page: 8 / 14

8. PARAMETER (PRESET) SELECT DIAL
Allows selection of any of the 16 presets (effects) listed in the EFFECTS LEGEND [9]. Upon selecting a new
preset, the CLIP LED [2] will blink red indicating that the effect has finished loading.
NOTES: Whenever a new preset is selected, the effect will load whatever the
current settings are for the PARAMETER CONTROLS [7].
9. EFFECTS LEGEND
A list of the 16 presets and the parameters (time, rate, etc.) that are controlled for each of the following
presets/effects:
PRESET
(PARAMETER SELECT)
NAME PARAMETER 1 PARAMETER 2
1 CHAMBER REVERB Time: 150ms ~ 5000ms Damping: 200Hz ~ None
2 PLATE REVERB Time: 100ms ~ 4000ms Damping: 200Hz ~ None
3 ROOM REVERB Time: 150ms ~ 5000ms Damping: 200Hz ~ None
4 CATHEDRAL REVERB Time: 100ms ~ 8000ms Damping: 200Hz ~ None
5 SPRING REVERB Time: 150ms ~ 5000ms Damping: 200Hz ~ None
6 GATED REVERB Time: 150ms ~ 500ms Damping: 200Hz ~ None
7 REVERSE REVERB Time: 150ms ~ 500ms Damping: 200Hz ~ None
8 DELAY + REVERB Delay Time: 0 ~ 225ms Reverb Time: 0 ~ 5000ms
9 BRIGHT DELAY Time: 0 ~ 500ms Feedback: 0 ~ 99%
10 WARM DELAY Time: 0 ~ 500ms Feedback: 0 ~ 99%
11 DARK DELAY Time: 0 ~ 500ms Feedback: 0 ~ 99%
12 PING PONG DELAY Time: 0 ~ 500ms Feedback: 0 ~ 99%
13 CHORUS Rate: 0.125Hz ~ 8Hz Depth: 0 ~ 100%
14 PHASER Rate: 0.250Hz ~ 16Hz Depth: 0 ~ 100%
15 FLANGER Rate: 0.10Hz ~ 2.5Hz Depth: 0 ~ 100%
16 ROTARY SPEAKER High Speed: 0.50Hz ~
25Hz Width: 0 ~ 100%
______________________________________________________________________________________
3
3
© GECKO MUSIC GROUP. All Rights Reserved.