1
2
4
5
6
7
8
9
12
10
11
260
Getting Started
4
260
USER
GUIDE
IEC Power Cord Receptacle
The 260™ comes with a power supply that will accept voltages ranging
from 100V-120V at frequencies from 50Hz-60Hz. An IEC cord is included.
EU and Chinese version accepts 220V-240V at frequencies from 50Hz-
60Hz.
PC Connection
This RS232 connection is used to send and receive information to and
from the GUI interface.
Outputs 1-6
The output section of the 260™ offers six electronically balanced XLR
connectors.
Inputs 1-2
The input section of the 260™ offers two electronically balanced XLR
connectors.
Chapter 1 Getting Started
1.1Rear Panel Connections
1. Power Cord Receptacle
2. PC Connection
3. ICD Connection
4. Outputs 6
5. Outputs 5
6. Outputs 4
7. Outputs 3
8. Outputs 2
9. Outputs 1
10. Inputs 2
11. Inputs 1
12. Power Switch
3
ICD Connection
This connection is appropriative for factory testing.
Power Switch
The Power Switch turns the 260™ on and off. Note: it is recommended
that power amplifiers connected to the 260™ should be powered down
prior to cycling the power on the 260™.
