14
Water temperature regulation
Every 15 to 90 minutes the pump will run to ensure
accurate water temperature readings as well as avoid
heater activation in dry conditions� After verifying pump
activation and taking a water temperature reading if
required, the system automatically turns the heater on to
reach and maintain water temperature at Set Point�
Indicator flashes when taking water
temperature reading�
Cooldown
After heating the spa water to the desired Set Point, the
heater is turned off, but its associated pump (Pump 1
low-speed or CP) remains on for a predetermined period
of time to ensure adequate cooling of the heating element,
prolonging its useful life�
Smart Winter Mode
Our Smart Winter Mode protects your system from the
cold by turning pumps on several times a day to prevent
water from freezing in pipes�
The “SWM” indicator lights up when freezing is
detected and flashes when the purge is active�
Others functions
