9
Keypad functions
Custom key
This key is available for 1-pump systems only� It is also
available only if the spa controller configuration uses a
functionality related to the
Custom
key�
The following functions are available on this key:
• Quick On Off
• Soak
• Auxiliary output
• Off
• Manual Economy
A short press on the
Custom
key will turn on or off the selected mode in the list�
Quick On Off
This function allows you to shut down all the active user
demands (pump and light) by a key press and resume
their state by another press�
Activating or deactivating
Quick On Off
mode with the
Custom
key will have no special message being displayed�
Soak
This function allows you to soak in silence in the spa�
When enabled,
Soak mode
stops all pumps activated by
the user as well as the filtration and Smart Winter Mode
cycles for 30 minutes�
Water temperature regulation remains active as well as
circulation pump if it is configured as “Always On”�
While
Soak mode
is engaged, the display toggles between
the "Sby", the time and the water temperature� The display
will show "On" for 3 seconds upon exit of
Soak mode
�
Auxiliary output
It allows you to control an auxiliary output� When the
control of the Auxiliary is selected by the
Custom
key,
"AUX" blinks on the display� Then, the Auxiliary can be
turned On or Off by another press on the
Custom
key�
When the Auxiliary output is being turned on, the display
shows "On" for 3 seconds� When the Auxiliary is being
turned off, the display shows "OFF" for 3 seconds�
Auxiliary output will be turned off automatically after
20 minutes if it is not done manually� Note that your spa
controller can be configured with a different timeout�
Off
(Described previously in this document)
Manual Economy
This mode allows you to lower the temperature set point
of the spa by 20 °F (11 °C)� When the Economy mode is
ON, the display toggles between the “Eco” message, the
time, and the water temperature� The display will show
"noE" for 3 seconds upon exit of
Economy mode
�
