EN
6 (60)
45036003927164427 © 02-2023
970.066.00.0(02)
2
Reconnect the power supply cable and wait
until the bottom LED flashes once.
✓ The flush control is in programming mode
for 2 minutes.
3
Place your hand over the sensor until both
LEDs light up.
4
Wait 2 minutes until the LEDs flash once
and the flush control has exited
programming mode.
✓ The flush control has been switched over
to dual flush.
Actuating the large flush volume (approx. 4 l):
▶
Place your hand over the sensor at a
distance of 0 to 10 cm for approx.
2 seconds.
T
Result
✓ Both LEDs light up and a flush is actuated.
Actuating the small flush volume (approx. 2 l):
