EN
45036003927164427 © 02-2023
970.066.00.0(02)
5 (60)
Operation
Actuating a single flush
A single flush (approx. 6 l) is set at the factory. It is
possible to switch over to a dual flush if required. →
See "Switching over to dual flush", page 5.
▶
Place your hand over the sensor at a
distance of 0 to 10 cm for approx.
0.5 seconds.
T
Result
✓ Both LEDs light up and a flush is actuated.
Switching over to dual flush
A single flush is set at the factory. The flush control
can be switched over to a dual flush (2/4 l) as
follows:
1
Disconnect the power supply cable.
