GeBe POWERMAN 8500 GR-ES, Manual

Page: 20 / 28

20
English English
7. Turn the choke lever to the“OPEN” position after
the engine is warm.
8. Don’t use electric apparatus before setting circuit
breaker to the“ON” position.
ELECTRIC STARTING
1. Remove all the loads form the output side .
2. Turn the fuel valve to the “ON” position.
3. Turn the choke lever to the “CLOSE” position
NOTICE
Don’t close the choke when starting the engine in
warm state.
4. Turn the generator switch to electric starting
position.
5. After starting engine, immediatelly release
generator switch and generator switch can
automaticly return to open position.
6. Turn the choke lever to “OPEN” position after the
engine is warm.
NOTICE
Turn the GENERATOR switch to electric position and
hold for more than 5 seconds or damage may be
caused to the starting motor. If starting fails, release
the switch and wait for 10 seconds before operating
it again.
If the speed of the starting motor drops fast after
a period of time, it suggests the battery should be
recharged.
STOPPING THE ENGINE
1. Turn the AC circuit breaker to the OFF position.
2. Turn the generator switch to the OFF position.
3. Turn the fuel valve to the OFF position.
NOTICE
To stop the engine in an emergency, turn the
generator switch to the OFF position.
MAINTENANCE
The engine must be properly maintained to ensure its operation be safe, economy and trouble-free, as well as
eco-friendly. In order to keep your gasoline engine in good working condition, it must be periodically serviced.
The following maintenance schedule and routine inspection procedures must be carefully followed.
Item Task Each time First month
or first
20 hrs of
operation
Every
3 months or
every 50 hrs
of operation
Every year
or every
100 hrs of
operation
Engine oil
Check- Refill
°
Replace
° °
Air filter
element
Check
°
Clean
°
Replace
°
Deposit cup Clean
°
Spark Plug Check and adjust
°
*
Spark arrester Clean
°
Idling ** Check and adjust
°
Valve clearance ** Check and adjust
°
Fuel tank & fuel
filter **
Clean
°
Fuel line Check Every 2 years (change if necessary)
Cylinder head,
piston
Clean up carbon **
<225 cc - every 125. hour
>225 cc - every 250. hour
* These items should be replaced if replacement needed.
** These items should be maintained and repaired by our authorized dealer, unless the owner has
appropriate tools and is proficient with mechanical maintenance.
NOTICE
● If the gasoline engine frequently work under high temperature or heavy load, change the oil every 25 hours.
● If the engine frequently work under dusty or other severe circumstances, clean the air filter element every
10 hours; If necessary, change the air filter element every 25 hours.
• The maintenance period and the exact time (hour), the one which comes first should govern.
● If you have missed the scheduled time to maintain your engine, do it as soon as possible.
WARNING
Stop the engine before servicing. Put the engine on a level surface and remove the spark plug cap to prevent
the engine from starting. Never run your engine in a poorly ventilated room or other enclosed area, be sure to
keep good ventilation in working area. The exhaust from the engine may contain poisonous CO, inhalation can
cause shock, unconsciousness and even death.