Gearmore T230, Operation, Service And Parts Manual

Page: 12 / 47

9
SET-UP
2) Remove the cotter pins from the
hitch pins (
picture 3
);
3) Remove the lower hitch pins from
the lower hitch blocks
(
picture 3
);
4) Before attaching the equipment to the tractor, make sure that the ground is smooth
and flat and that nobody is standing between the tractor and the tiller; slowly move
the tractor towards the tiller by aligning the tractor lifter arms with the blocks' holes
(
picture 4
); turn the engine off and pull the brake;
Picture 4
Picture 3