10
5. REMOTE CONTROL SOCKET
Insert the remote control into this input.
WARNING
- This is a mains powered output and
only the remote control must be inputted into this
socket.
6. MAINS SOCKET
Insert only the supplied IEC mains cable into this
socket. The socket also contains an integral fuse. If
replacing the fuse, ensure the unit is disconnected
from the mains power and only insert the same
rated fuse as was in the unit previously.
7. RESERVOIR METER
This meter indicates how full the reservoir is.
Monitor this meter carefully when filling the
reservoir and when operating the unit.
NOTE
– Operating the fog machine without fluid
may cause damage to the unit.
FUNCTIONS
FRONT & BACK PANELS
1. RIGGING HANDLE
This handle is used for hanging the unit on
rigging apparatus, such as truss and stage
equipment. The angle on the truss can be
adjusted by using the turn wheels. Ensure the
turn wheels are fully tightened when in use. The
handle must not be used for handling the unit
during operation.
2. SPRAY NOZZLE
Fog spray emits from this nozzle during operation.
Do not touch the unit during operation or during
a period of cool down after operation, as it gets
very hot.
3. FLUID RESERVOIR AND HOSE
Untighten the cap to fill fluid into the unit. Do not
pinch the hose at any point, which may cause
breakage to or impede movement down the
hose.
4. POWER SWITCH
Toggle this switch to power the unit on or off.
When the unit is powered on, the switch will
illuminate.
1
3
4
5
6
7
2
