![background image](http://html1.mh-extra.com/html/gear4/pg533-houseparty-rise-2-wireless/pg533-houseparty-rise-2-wireless_user-manual_3973224017.webp)
AlarmDock Prem UI V1.9
BT - Connection Model
Refer to P1050 Connection Model document
Buttons Used:
BT Button
During Standby
BT Button on speaker will carry no functionality when speaker is in Standby I.e. cannot access pairing mode when unit is in standby.
Speaker will enter ON Mode if a paired device is connected via BT’s setting menu:
Further functionality through app:
Bluetooth disconnection timer (0min - 6days) Default: 30 mins (TBC after testing)
Power button to turn speaker ON/OFF
On Mode
BT is in connectable state
BT icon is off
Default disconnection time:
30mins
After 30mins
‘Turn on your speaker on or
re-connect your speaker via the iPhone Bluetooth Settings’
splash screen appears on app
Within 30mins:
- Pressing ‘Power’ on the app screen will turn speaker back on
- App and speaker has full functionality
Default BT mode: Connecting/Connectable
BT icon: flash 500ms On 500ms Off for 30s
Pressing BT Button
(Short Press)
Press and Hold BT Button
(6s)
Press and
hold BT button
(20s)
Pairing information cleared.
A tone will be played once the full
time has elapsed to indicate reset has been successful.
Enters pairing mode
BT icon: Flashes 200ms on 200ms off
If BT is connected: Goes to connectable
If BT is not connected: Remains in connectable/connecting state but BT icon is off
After 30s
BT Mode: Connecting/Connectable
BT Icon: Off
Page 17 of 24
Summary of Contents for PG533 HouseParty Rise 2 Wireless
Page 1: ......