6.
Your iPhone will display a message indicating that the accessory requires an
application. Click Yes to go to the App Store to download the UnityRemote
App.
7.
Follow the onscreen instructions in UnityRemote App to setup your devices.
UnityRemote Multifunction Button
UnityRemote features a multifunction button to perform the following actions:
•
Power on Unity: Press the button for half a second. The red light will stay
on for 3 seconds to indicate UnityRemote powered up normally
•
Power off Unity: Press the button for half a second when UnityRemote is
powered on and release the button. The 3 quick flashes mean the unit is
powering off
•
Put Unity into Pairing: Press and hold the button for about 5 seconds until
the red light starts flashing slowly. This will put UnityRemote into pairing
mode, letting you add more iPhones to the list of devices UnityRemote
can work with
•
Clear all settings: Press and hold the button for about 15 seconds until
UnityRemote's red light flashes quickly.
How
UnityRemote
and iPhone interact
The last phone paired is considered the 'master phone'
When the master phone is connecte
d to Unity, no other phone can be connected
at the same time
When the master phone walks out of range or is shut down, Unity will attempt to
reconnect to it. If another phone wants to connect to Unity, the connection must
be made via Settings >General > Bluetooth. This phone will then become the
master iPhone.
When you walk out of range of UnityRemote, UnityRemote will attempt to
reconnect to your iPhone. The longer you stay out of range, the longer the delay
between reconnection attempts will be (up to 30 seconds after 1 hour).
After 2 hours of non
-
use (phone is out of range), UnityRemote will automatically
switch off to preserve battery life.
The USB port is only used for Firmware upgrades not for re-charge of
battery and link to PC.
