Gear Lite ADC-9033, User Manual, Page: 23 / 32

Configuration (Iss. 04) • 22
Status Report
This menu selection is primarily for Ross Video use. If an on-board error has
occurred with the ADC-9033, this menu item will provide some indication as to
the nature of the problem. In Status Report mode, the
DOWN and UP LEDs
will flash at the same time and the number of consecutive flashes will indicate
the type of error. A simple single flash followed by a long pause before
repeating means no error is reported. If multiple flashes occur, record the
number of flashes. Use the
Down button to clear this error and view if any other
errors are concurrent. Contact Ross Video Technical Support if you require any
assistance.
The Up button provides access to the firmware version display:
1. While holding the Up button the DOWN LED will flash the upper
digit of the firmware version.
2.
While the DOWN LED is flashing, note the status of the UP LED.
• If the UP LED is on, this indicates that the lower digit is zero.
• If the UP LED is off then after the down LED is finished the up
LED will flash for the lower digit of the version. This is followed
by a pause where both LEDs are off and then repeats.
3. Release the Up button to return to the Status Report mode.
PLL Enable
This menu item selects one of two internal clock locking circuits. For normal
operation, the default setting of
On should be maintained. For input video
signals which exhibit asynchronous switches between non-timed sources or
signals with excessive noise, the
Off setting provides faster locking, but adds
more jitter to the output signal.
Menu Accessibility
Note that some user-controlled settings may become inaccessible depending
upon the Video Standard and Video Format that have been selected from the
menu.
Table 3 illustrates which menu items are unavailable in each of the video
standards and formats.
Table 3 ADC-9033 Menu Access by Video Standard/Format Selection
Switch Position and
Menu Item
Analog Video Formats and
Standards
YP
R
P
B
/RGB
Composite/YC
525 625 NTSC PAL
0
Video Standard
a
1
Video Format
b
2 YP
R
P
B
/RGB Levels
c
N/A N/A