Gear Lite ADC-9033, User Manual, Page: 20 / 32

19 • Configuration (Iss. 04)
Function Menu Notes
Some of the menu items in Table 2 are explained here in further detail as
follows:
Video Standard
Use this menu to select the video standard of the incoming analog video. Please
note that not all formats and levels exist for all standards. For example, RGB
does not exist for PAL-N or PAL-M since this format exists in 525 and 625 line
versions and those are covered by the other two standards. Refer to
Table 4 on
page 24 for a list of supported video standards.
Video Format
Use this menu to select the video format of the incoming analog video. Note that
not all formats and levels exist for all standards. When PAL-M or PAL-N are the
selected video standard the two component formats (YP
R
P
B
and RGB) are
unavailable. Refer to Table 4 on page 24 for a list of supported video standards.
YP
R
P
B
/RBG Level
Use this menu to select the video level of the incoming analog component video.
Note that levels that do not apply for the currently selected video standard and
format will be unavailable when in this menu. Refer to
Table 4 on page 24 for a
list of supported video standards.
D VI End
VI Ends 1 line before
default
–

VI Ends at default* (Line
20 for 525, Line 23 for 625)
 
VI Ends 1 line after default +
 
VI Ends 2 lines after
default
+

E
Status
Report
See Notes
F PLL Enable
On*
 
Off
 
a.Refer to Table 4 on page 24 for a list of supported video standards.
Table 2 Function Setup and Configuration Menu
Function
Selection
Switch
Position
Function
Menu
Up/Down Buttons Mode
Selection Menu
LED Display
DOWN UP