– 17 –
Dishwasher Components
Inner Door Panel (PermaTuf Tub Models)
The inner door panel on the PermaTuf tub models
must be removed to access the control board,
detergent/rinse module, control TCO, tactile switch,
door switch, pocket handle, vent, console, and lens.
To remove the inner door panel:
1. Remove the 8 Phillips-head screws from the
inner door.
2. Disconnect the 2 wires from the detergent/rinse
module.
(Continued next page)
Outer Door Panel (Stainless Steel Tub Models)
The outer door panel on the stainless steel tub
models must be removed to access the control
board, detergent/rinse module, control TCO, tactile
switch, door switch, vent, and lens.
To remove the outer door panel:
1. Remove the two 1/4-in. hex-head screws from
the bottom of the front door panel (one on each
side).
2. Remove the ten T-15 torx screws from the inner
door panel.
Caution: Carefully remove the outer door from the
inner door frame.
