9
Using the clock and timer.
GEAppliances.com
To Set the Clock
The clock must be set to the correct time of
day for the automatic oven timing functions
to work properly . The time of day cannot be
changed during a timed baking or self-cleaning
cycle .
Press the
Clock
pad .
On models with number pads, press them
in order to set the correct time of day .
On models with
Hour
and
Min +
and
–
pads, press them to set the correct time
of day .
Press the
Start
pad .
Make sure the clock is set to the
correct time of day.
To Set the Timer
Press the
Kitchen Timer On/Off
pad .
On models with number pads, press them
until the amount of time you want shows
in the display . For example, to set 2 hours
and 45 minutes, press 2, 4 and 5 in that
order .
On models with
Hour
and
Min +
and
–
pads, press them until the amount of
time you want shows in the display . The
maximum time you can enter in minutes
is 59 . Cooking times more than 59
minutes should be changed to hours and
minutes . For example, enter 90 minutes
as 1 hour, 30 minutes .
If you make a mistake, press
Kitchen
Timer On/Off
and begin again .
Press the
Start
pad .
After pressing the
Start pad, SET disappears;
this tells you the time is counting down,
although the display does not change until one
minute has passed. Seconds will not be shown
in the display until the last minute is counting
down.
When the timer reaches
:00
, the control
will beep 3 times followed by one beep
every 6 seconds until the
Kitchen Timer
On/Off
pad is pressed .
The 6-second tone can be canceled by following
the steps in the Special features of your oven
control section under Tones at the End of a
Timed Cycle.
The timer is a minute timer only .
The timer does not control oven
operations . The maximum setting
on the timer is 9 hours and 59
minutes .
To Reset the Timer
If the display is still showing the time remaining,
you may change it by pressing the
Kitchen
Timer On/Off
pad, then press the number
pads (on some models) or the
Hour
and
Min +
or
–
pads (on some models) until the time you
want appears in the display .
If the remaining time is not in the display (clock,
delay start or cooking time are in the display),
recall the remaining time by pressing the
Kitchen Timer On/Off
pad and then pressing
the number pads (on some models) or the
Hour
and
Min +
or
–
pads (on some models) to
enter the new time you want .
To Cancel the Timer
Press
Kitchen Timer On/Off
pad twice .