
– 91 –
The ice box thermistor is located on the inside of the
wire harness cover.
,FH%R[7KHUPLVWRU5HSODFHPHQW
1. Place the replacement thermistor next to the
original thermistor.
2. Cut the wiring at a location that will match the
original length when the replacement thermistor
is spliced to it.
3. Use plastic bell connectors (
3DUW
:
WR01X10466). Fill each connector with silicone
grease, then splice a new thermistor into the
harness as shown in the illustration.
Cover
Thermistor
$XJHU0RWRU
The auger is rotated by utilizing a DC reversible
motor that is located inside the left side refrigerator
door. It is necessary to remove the ice bucket to
replace the auger motor.
$XJHU0RWRU5HPRYDO
1. Remove the wire harness cover (see the
Icemakers section, follow steps 1 through 3).
2. Disconnect the auger motor wire harness.
3. Remove the two 5/16 in. hex head screws that
attach the auger motor to the ice box.
127(
As shown below, the coupling rotates
clockwise for crushed ice, and counterclockwise for
cubed ice.
Disconnect
Auger Motor
Silicone Grease