Safety
Instructions for the Safe Operation
12
GEA Breconcherry Motor-driven Orbital Cleaner TMC 45/TMC 85
Edition 18/12/2012
Instructions for the Safe Operation
Dangerous situations during the operation can be avoided by safety-cons-
cious and proactive behaviour of the staff.
General Principles:
To ensure the safe operation of the cleaner the following principles apply:
•
The operating instructions must be kept ready to hand at the cleaner's
place of use. It must be complete and in clearly legible form.
•
Only use the cleaner for its intended use.
•
The cleaner must be functional and in good working order. Check the
condition of the cleaner before starting work and at regular intervals.
•
Wear tight-fitting work clothing for all work on the cleaner.
•
Ensure that nobody can get hurt on the parts of the cleaner.
•
Immediately report any faults or noticeable changes on the cleaner to the
person responsible.
•
Observe the accident prevention regulations and all local regulations.
Installation
For installation, the following principles apply:
•
Only properly qualified staff is allowed to install, assemble and set the
cleaner into operation.
•
Ensure that adequate working and traffic areas are available at the place
of installation.
•
Observe the maximum load-bearing capacity of the installation surface.
•
Observe the transport instructions and markings on the part(s) to be
transported.
•
Remove any nails protruding from transport crates immediately after
opening the crate.
•
Under no circumstances should anyone stand under a suspended load.
•
During assembly, the cleaner's safety devices might not be working
effectively.
•
Reliably secure machine parts which have already been connected
against inadvertently being switched on.
