13
Safety
Instructions for the Safe Operation
Commissioning/Setup Mode
For commissioning, the following principles apply:
•
Take protective measures against dangerous contact voltages in accor-
dance with pertinent regulations.
•
The cleaner must be completely assembled and correctly adjusted. All
screw connections must be securely tightened. All electrical cables must
be installed correctly.
•
Reliably secure machine parts which have already been connected
against inadvertently being switched on.
•
Relubricate all lubricating points.
•
Make sure lubricants are used properly.
•
After conversion of the cleaner, residual risks must be reassessed.
Setting into Operation
For setting into operation, the following principles apply:
•
Only allow properly qualified staff to set the cleaner into operation.
•
Establish all connections correctly.
•
The safety devices for the cleaner must be complete, fully functional and
in perfect condition. Check the function before starting any work.
•
When the cleaner is switched on, the danger zones must be free.
•
Remove any liquids that have escaped without leaving residues.
Operation
For operation, the following principles apply.
•
Monitor the cleaner during the operation.
•
Safety devices must not be changed, removed or taken out of service.
Check all safety devices at regular intervals.
•
All guards and hoods must be fitted as intended.
•
The place of installation of the cleaner must be adequately ventilated at
all times.
•
Structural alterations of the cleaner are not permitted. Immediately report
any changes on the cleaner to the person responsible.
•
Always keep danger zones clear. Do not leave any objects in the danger
zone. Only allow persons to enter the danger zone when the machine is
de-energized.
•
Regularly check that all emergency stop devices are working correctly.
