GEA OTC 3-02-137, Instruction Manual And Parts List

Page: 140 / 182

Westfalia Separator
140
Mineraloil Systems GmbH
2051-9001-010 / 1205
•
Lead the motor connecting cable with at least 4 x 1.5 mm
2
Cu (for shipboard
operation 3 x 1.5 mm
2
) through the cable gland into the starter box and
•
connect the corresponding leads as follows:
L1 to terminal 2 of the bimetal relay F1
L2 to terminal 4 of the bimetal relay F1
L3 to terminal 6 of the bimetal relay F1
PEN to earthing terminal
•
Check the setting of the motor rated current at the bimetal relay F1.
If necessary, correct the setting as per table (see section 4.2.3).
•
Screw the cover on to the starter box.
•
Check the function of the ON and OFF buttons.
Motor wiring diagrams
The operating voltage of the local network determines the type of connection of
the motor.
The switching mode is stated on the motor nameplate.
Fig. 269
Delta connection (counterclockwise
rotating field)
Fig. 270
Star connection (counterclockwise
rotating field)
•
Remove the cover of the terminal box.