GEA OTC 3-02-137, Instruction Manual And Parts List

Page: 110 / 182

Westfalia Separator
110
Mineraloil Systems GmbH
2051-9001-010 / 1205
Fig. 188
•
Insert gasket 1 in the groove.
•
Fit bottom bearing pressure piece 3
with fitted gasket in the pivoting
bearing.
The recess in the bottom bearing
pressure piece 3 must point to
bore 2.
•
Grease gasket 1 as per lubrication
schedule .
Fig. 189
•
Mount bearing cover 1.
•
Pay attention to correct positioning!
Note:
The hex head screw 2 is glued in with
Loctite 275.
Fig. 190
•
Screw the three hex head screws 1
(M 10 x 20) with lock washers 2 into
the bearing cover.
Fig. 191
To avoid accidents:
•
Fit guard 1 (protection against
contacting rotating drive parts )
beneath the separator as de-
scribed in section 4.2.2
•
Place the lower section of the frame
on wear insert 1 and
•
bolt tight with four hexagon nuts 3.