Fig.4:
Danger zone at the valve
•
In the event of malfunctions, shut down the valve (disconnect from the power
and air supply) and secure it against being used.
•
Never reach into the motor stool (1) or the valve housing (2) when the valve is
switching. There is a danger of injury to fingers.
•
With a closed valve there is danger of injury when the clamp (3) is opened
since the released closing pressure will suddenly lift the actuator. Therefore,
release the closing pressure by opening the valve before detaching the clamp
(3) by supplying the actuator (A) with compressed air.
•
Before starting any service, maintenance or repair work, disconnect the valve
from the power supply and secure it against inadvertently being switched
back on again.
•
Only allow a qualified electrician to carry out any work on the electrical power
supply.
•
Check the electrical equipment of the valve at regular intervals. Immediately
remedy loose connections and molten cables.
•
If work on live parts cannot be avoided, call in a second person, who can
operate the main switch in case of an emergency.
•
The housing sockets have very sharp edges. When transporting and
assembling the valve be sure to wear suitable protective gloves.
Safety
430BAL012841EN_1
16
07.03.2018
Summary of Contents for Aseptomag ADV
Page 68: ......
