Fig.40:
Extend the piston rod with the groove upwards.
2.
Lift the internal assembly slightly to detach it from the T-slot on the drive
spindle.
Fig.41:
Unhooking the internal assembly
3.
Remove the housing seal without a tool.
!
Do not damage the sealing surfaces on the housing and internal
assembly.
Fig.42:
Removing housing gasket
®
The internal assembly has been disassembled.
10.8.2 Assembling the Internal Assembly
Carry out the following steps:
1.
Install the internal assembly in the reverse order of disassembly, see
Section 10.8.1, Page 44.
®
The internal assembly has been assembled.
Maintenance
Disassembling and Assembling the Internal Assembly
430BAL012841EN_1
07.03.2018
45
Summary of Contents for Aseptomag ADV
Page 68: ......
