49-5000561 Rev. 1
INST
ALLA
TION INSTRUCTIONS
Installing the Zoneline
9. Connect Auxiliary Features, if required
Auxiliary Controls - Terminal Connections
NOTE:
&RQQHFWRU.LW5$.&'&LVUHTXLUHGWRPDNH&'&
electrical connections.
6HHZLULQJGLDJUDPVIRU5$.&'&EHORZ
7KHDX[LOLDU\FRQWUROWHUPLQDOFRQQHFWVDUHORFDWHGRQWKH
front of the unit.
7RFRQQHFWDX[LOLDU\GHYLFHVWRWKHXQLWFRQQHFWWKH
ZLUHVIURPWKH5$.&'&.LWWRWKHZLUHVIURPWKH
DX[LOLDU\GHYLFHV7KHQLQVHUWWKH5$.&'&FRQQHFWRU
LQWRWKHPDWLQJFRQWUROERDUGFRQQHFWRUQH[WWRWKH
thermostat connector.
2. After all desired connections have been made, replace
the front case panel.
7KHRZQHULVUHVSRQVLEOHIRUPDNLQJDOOFRQQHFWLRQVDQGVHWWLQJWKHDSSURSULDWH
AUX SET
mode.
NOTICE:
,PSURSHUZLULQJPD\GDPDJHWKH=RQHOLQHHOHFWURQLFV1RFRPPRQEXVLQJLVSHUPLWWHG'DPDJHRU
erratic operation may result. A separate wire pair must be run from each separate controlling switch to each
LQGLYLGXDO=RQHOLQH
Central Desk Control (Field Supplied)
7KH&HQWUDO'HVN&RQWUROLVDIHDWXUHWKDWDOORZVWKHXQLWWREHPDGHRSHUDEOHLQRSHUDEOHIURPDUHPRWHORFDWLRQ
Operation of the feature requires that an
ON-OFF
switch
at the remote location be wired to the two CDC terminals
RQWKHFRQWUROSDQHORIWKH=RQHOLQH:KHQWKHUHPRWH
switch is
CLOSED
, the unit cannot be operated in the Fan,
&RRORU+HDWPRGHVE\WKHFRQWURO7KH)UHH]H6HQWLQHO
and the Heat Sentinel features remain operable. When the
remote switch is Open, the unit is fully operable by control.
7KH5$.&'&DFFHVVRU\PXVWEHXVHGZLWKDFHQWUDOGHVN
FRQWUROV\VWHP1R³&RPPRQ%XVLQJ´LVSHUPLWWHG
NOTICE:
,PSURSHU&'&ZLULQJPD\GDPDJHWKH=RQHOLQH
HOHFWURQLFVRUFDXVHHUUDWLF=RQHOLQHRSHUDWLRQ1R
common busing is permitted. A separate wire pair must
be run from each separate controlling switch to each
LQGLYLGXDO=RQHOLQH
Use only Class 2 wiring.
CDC Switch
CDC
CDC
R
R
E. Fan
E. Fan
Connect to
external fan relay
Connect to external
fan relay
3
R
CDC
Ext Fan
Ext Fan
CDC Wiring
Connectors
RAKCDC
CDC Red
1
2
