Consumer Support
Troubleshooting T
ips
Care and Cleaning
Operating Instructions
Safety Instructions
10
To maintain optimum performance, clean the filters at least every 30 days.
Air Filters
Turn the Zoneline off before cleaning.
The most important thing you can do to
maintain the Zoneline is to clean the filter
at least every 30 days. Clogged filters reduce
cooling, heating and air flow.
Keeping these filters clean will:
■
Decrease cost of operation.
■
Save energy.
■
Prevent clogged heat exchanger coils.
■
Reduce the risk of premature component
failure.
To clean the air filters:
■
Vacuum off the heavy soil.
■
Run water through the filters from the
back side.
■
Dry thoroughly before replacing.
NOTE:
The air filters are interchangeable
and will fit in either the right or left side.
To remove the air filters:
To replace the air filters:
CAUTION:
Do not operate the
Zoneline without the filters in place. If a filter
becomes torn or damaged, it should be replaced
immediately.
Operating without the filters in place or with
damaged filters will allow dirt and dust to reach
the indoor coil and reduce the cooling, heating,
airflow and efficiency of the unit.
Replacement filters are available from your
salesperson, GE dealer, GE Service and Parts
Center or authorized Customer Care
®
servicers.
Dirty filter—Needs cleaning
Clogged filter—Greatly
reduces cooling, heating
and airflow.
FRONT
FRONT
Pull up
Push down
2 Air filters
Care and cleaning.
