GE WSXH208T, Technical Service Manual, Page: 39 / 51

38
To Remove or Replace Tub Vanes:
There are three plastic vanes mounted to the tub to aid
in the washing action during the wash cycle. Two of the
vanes are secured by a screw and a tab bent into place
on the tub. To remove these vanes the tub has to be
removed. The third vane is secured only by a single
screw and may be removed through the door opening.
1. Identify the vane that is located on the seam of the
tub and remove the mounting screw.
2. Slide vane forward toward door opening until it
stops.
3. Pull vane upwards to disengage tabs on vane from
slots in tub.
4. Reverse procedure to replace. If screw hole on tub
is stripped, drive screw into other hole on vane to
secure.