
25
2. If dryer is stacked on washer, remove clothes dryer
from top of washer.
3. If freestanding or undercounter installation, remove
the top panel.
4. Remove timer knob assembly by pushing in while
turning counterclockwise (CCW) to unscrew.
5. Use pliers to squeeze timer indicator locking tabs
simultaneously, while pulling outward to remove.
NOTE:
Small teeth on timer indicator are used to
adjust indicator dot if cycle does not correspond
with indicated function.
6. Turn timer mounted dispensing cam clockwise
(CW) to position rectangular holes at the 3 o'clock
and the 9 o'clock position, over timer mounting
screws and remove screws.
7. Slide timer rearward to remove (dispensing cam
does not have to be removed). Disconnect timer
terminal blocks to free timer. Note that timer and
terminal blocks are color coded and keyed (to slot
in timer) to ensure correct placement.
8. Install new timer, noting timer shaft and indicator
are keyed to assure correct orientation.
NOTE
: Ensure wiring to new timer is correct before
applying power and testing. Timer has AC and
DC connections. Timer terminal blocks and timer
are color coded to indicate correct positioning.
Refer to appropriate electrical diagram if neces-
sary.
9. Reverse procedure to reassemble.
WATER LEVEL CONTROL
The water level control is a pressure activated single-
Summary of Contents for WSXH208T
