GE Vivid S70, User Manual

Page: 539 / 709

Measurement Package
Vivid S70 / S60
–
User Manual
12-19
BC092760-1EN 01
Measurement Package
There are many more measurements and parameters in the
measurement package than shown in the default
Measurement
menu. Use the configuration system to set up the
measurements that should be available in the
Measurement
menu and which parameters should be calculated.
A list of all cardiac calculations with needed measurements and
location in the Measurement package can be found in the
Reference manual.
Basic operations
Opening the Measurement configuration package
1. Press Utility / Config on the Touch panel and select the
category Measure/Text .
The
Measurement menu
sheet is displayed (Figure 12-10).
Display of the Measurement categories
1. Press M&A categories in the
Configuration
window.
The M&A categories are displayed in a pop-up window.
2. Check the categories to be displayed.
Uncheck the categories to hide.
To select a Measurement category in the
Measurement
menu:
1. Select the heading of the
Measurement
menu.
The measurement categories are displayed in a sub-menu.
2. Select the Measurement category to display.
Moving an item in the Measurement menu
1. Select an entry in the
Measurement
menu.
2. Press or to move the selection up or down inside
the
Measurement
menu.