GE VG4052 User Manual Download

Page: 43 / 64

CONNECTIONS

Things to Know Before
Connecting Components

Protect Your Components from Power Surges

•

Connect all components before plugging any

power cords into the wall outlet.

•

Always turn off the TV and other components

before you connect or disconnect any cables.

Position Cables Correctly to Avoid Audio Hum
or Interference

•

Insert all cable plugs firmly into their jacks.

•

Place the audio/video cables to the sides of the

TV’s back panel instead of straight down the

middle after you connect your components.

•

Try not to coil any twin-lead cables and keep

them away from the audio/video cables as much

as possible.

•

Make sure all antennas and cables are properly

grounded. Refer to the Safety Tips sheet packed

with your unit.

Protect Your Components from Overheating

•

Do not block ventilation holes in any of the

components. Arrange the components so that air

can circulate freely.

•

Do not stack components.

•

Allow adequate ventilation when placing your

components in a stand.

•

Place an amplifier or satellite receiver on the top

shelf of the stand so heated air rising from it will

not flow around other components.

➣

SETTING UP THE VCR

FIRST THINGS FIRST

➣

RECORDING

VCR BASICS

➣

OTHER FEATURES

CONNECTIONS

➣

PROGRAM THE REMOTE

➣

REFERENCE

Things to Know
Before Connecting
Components

Summary of Contents for VG4052

































































Search results

Summary of Contents for VG4052

Reviews:

Related manuals for VG4052

Brands by name

Popular brands

GE VG4052, User Manual

Search results

Summary of Contents for VG4052

Reviews:

Related manuals for VG4052

Brands by name

Popular brands