GE VG4052, User Manual

Page: 31 / 64

29
RECORDING
Program 1 (One time)
Channel 104 Cable
Start Time 12:00 AM
End Time 01:30 AM
Start Date 11/18/99 Thu
Tape Speed SLP
Press CLEAR to erase
Press MENU for next prog
3. Press CLEAR to erase or MENU to see the next program.
Using Two VCRs for Copying and
Editing Tapes
Use one VCR as the playback VCR and the other as the
recording␣ VCR .
1. Connect the VCRs using the diagram below .
2. Turn on both VCRs and TV .
3. Tune the TV to the VCR viewing channel (either 3, 4, or TV’s
video input).
4. If you are using coaxial cables for the connection, tune
recording VCR to channel 3 or 4—the one selected on the
playback VCR.
If you are using audio/video cables, select the line input (L1
for back jacks or L2 for front jacks) on the recording VCR.
5. Insert the tape you want to copy into playback VCR. Insert a
blank tape with its safety tab in place into recording VCR.
6. Using visual search, locate the segment you want to copy on
the playback VCR. Pause the tape at this location.
7. Press RECORD on the recording VCR, then PAUSE.
8. Press PAUSE on both VCRs to begin copying.
9. Press PAUSE on both VCRs to stop copying.
10. Repeat steps 6–9 to copy or edit additional segments.
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of␣ others.
PLAYBACK VCR
CABLE BOX
OR ANTENNA
RECORDING VCR
TO TV TO TV
CH
IN
OUT IN
AUDIO
VIDEO
3
56
4
(FROM ANT.)
OUT
(TO TV)
RF
CH
IN
OUT IN
AUDIO
VIDEO
3
56
4
(FROM ANT.)
OUT
(TO TV)
RF
IN
OUT
OR
OR
Two VCR Connection