GE VG2042 User Manual Download Page 22

Page: 22 / 56

VCR BASICS

Numbers (0 through 9)

Select a channel up to 99 by pressing

two numbers. Select a cable channel over 99 by pressing and

holding 1 until 1 – – appears on the screen. Then press the other

two numbers.

POWER

Turns the TV on and off.

SLOW + and –

Used with some TV menus to select and adjust

features.

VOL Up and Down

Raises and lowers sound of TV.

Playing a Tape

Tune the TV to your VCR viewing channel

(3, 4, or TV’s video input).

Insert a tape in the VCR.

If the Auto Play feature is set to ON, the tape automatically

begins playback (if the safety tab on the cassette is

removed).

•

Press FWD or REV to position the tape.

•

Press PLAY (if necessary) to begin tape play.

•

Press PAUSE for stop action.

•

Press TRACKING up or down to remove any streaks from the

picture, if necessary.

•

Press STOP to stop playback.

Automatic Tracking

The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking is
turned on whenever a tape is
inserted or the VCR’s power is
turned on.

Pause

If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.

TRACKING

POWER STOP•EJECT

CHANNEL

TV•VCR

RECORD

REV

PLAY•PAUSE

FWD

Summary of Contents for VG2042

























































Search results

Summary of Contents for VG2042

Reviews:

Related manuals for VG2042

Brands by name

Popular brands

GE VG2042, User Manual

Search results

Summary of Contents for VG2042

Reviews:

Related manuals for VG2042

Brands by name

Popular brands