GE VG2042 User Manual Download Page 20

Page: 20 / 56

VCR BASICS

Remote Buttons

The remote control is capable of controlling more than just

your VCR, and if you have compatible GE, RCA, or ProScan

components, you may be able to control them without even

having to program the remote.

Component Buttons

POWER

Turns off VCR when remote is set to control the VCR.

Also turns some compatible components on and off.

SAT CABLE

Turns on a compatible GE, RCA, or ProScan digital

satellite receiver and sets the remote to control the receiver. Can

be programmed to control different brands of digital satellite

receivers. Used with the POWER button to turn on a compatible

cable box (if programmed) and sets the remote to control the

cable box.

Turns on a compatible GE, RCA, or ProScan TV and sets the

remote to control the TV. Also used with the POWER button to

turn on a different brand of TV (if programmed) and sets the

remote to control the TV.

VCR

Turns on a compatible GE, RCA, or ProScan VCR and sets

the remote to control the VCR.

VCR Function Buttons

CHAN Up or Down

Selects next higher or lower channel in

the VCR’s channel memory.

CLEAR

Resets time counter to 0:00:00. Allows you to change

entries when setting the clock or a timer recording.

F.ADV

Lets you view one frame with each press of the button

when tape is in pause.

FWD

Fast forwards the tape when the VCR is stopped. Searches

forward through a tape during playback. Starts slow motion

during play-pause and increases slow-motion speed.

GO BACK

Switches between two channels. Select one channel

and then select another using the number buttons. Press GO

BACK to switch between the two channels.

INFO

Shows the status displays on the TV screen.

INPUT

Selects between the line input and the VCR’s tuner. Line

input refers to the signal coming from the component connected

to the AUDIO/VIDEO IN jacks on the back of the VCR.

CLEAR

INFO MENU

TV•VCR

GO BACK

INPUT

SPEED

TRACKING

SLOW

STOP

PLAY

PAUSE

F.ADV

RECORD

FWD

REV

POWER

VCR

SAT

CABLE

CHAN

VOL

MUTE

–

Summary of Contents for VG2042

























































Search results

Summary of Contents for VG2042

Reviews:

Related manuals for VG2042

Brands by name

Popular brands

GE VG2042, User Manual

Search results

Summary of Contents for VG2042

Reviews:

Related manuals for VG2042

Brands by name

Popular brands