manualshive.com logo in svg

GE V7865 Series, Hardware Reference Manual, Page: 50 / 84

Share
Download
GE V7865 Series Hardware Reference Manual Download Page 50

Embedded PC/RTOS Features  49

3.3.11  Timer 2 IRQ Clear (T2IC)

The Timer 2 IRQ Clear (T2IC) register is used to clear an interrupt caused by 
Timer 2. Writing to this register, located at offset 0x34 from the address in BAR2, 
causes the interrupt from Timer 2 to be cleared. This can also be done by writing a 
“0” to the appropriate “Timer x Caused IRQ” field of the timer Control Status 
Register (CSR1). This register is write only and the data written is irrelevant.

3.3.12  Timer 3 IRQ Clear (T3IC)

The Timer 3 IRQ Clear (T3IC) register is used to clear an interrupt caused by 
Timer 3. Writing to this register, located at offset 0x38 from the address in BAR2, 
causes the interrupt from Timer 3 to be cleared. This can also be done by writing a 
“0” to the appropriate “Timer x Caused IRQ” field of the timer Control Status 
Register (CSR1). This register is write only and the data written is irrelevant.

3.3.13  Timer 4 IRQ Clear (T4IC)

The Timer 4 IRQ Clear (T4IC) register is used to clear an interrupt caused by 
Timer 4. Writing to this register, located at offset 0x3C from the address in BAR2, 
causes the interrupt from Timer 4 to be cleared. This can also be done by writing a 
“0” to the appropriate “Timer x Caused IRQ” field of the timer Control Status 
Register (CSR1). This register is write only and the data written is irrelevant.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for V7865 Series





















































































Reviews:

No comments