GE V7865 Series Hardware Reference Manual Download Page 15

Page: 15 / 84

14 V7865 Hardware Reference Manual

Organization

This manual is composed of the following chapters and appendices:

Overview

provides a general description of the V7865 and General Safety terms

and symbols.

Chapter 1 Handling and Installation

describes unpacking, inspection, hardware

jumper settings, connector definitions, installation, system setup and operation of
the V7865.

Chapter 2 Standard Features

describes the unit design in terms of the standard PC

memory and I/O maps, along with the standard interrupt architecture.

Chapter 3 Embedded PC/RTOS Features

describes the unit features that are

beyond standard functions.

Maintenance

provides GE Intelligent Platforms’ contact information relative to

the care and maintenance of the unit.

Compliance

provides the applicable information regarding regulatory

compliance.

Appendix A

Connector Pinouts

illustrates and defines the connectors included in

the unit’s I/O ports.

Appendix B

AMI BIOS

describes the menus and options associated with the

American Megatrends, Inc. (system) BIOS.

Appendix C

Remote Booting

describes the menus and options associated with the

Intel Boot Agent.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for V7865 Series





















































































Search results

Summary of Contents for V7865 Series

Reviews:

GE V7865 Series, Hardware Reference Manual, Page: 15 / 84

Search results

Summary of Contents for V7865 Series

Reviews: