manualshive.com logo in svg

GE V7865 Series, Hardware Reference Manual, Page: 39 / 84

Share
Download
GE V7865 Series Hardware Reference Manual Download Page 39

38  V7865 Hardware Reference Manual

2.7 Ethernet Controllers

The V7865 supports Ethernet LANs with two Intel Ethernet controllers (82571 
Dual GbE controller). 10Base-T, 100Base-TX and GbE options are supported via 
two front panel RJ45 connectors. 

2.7.1  10Base-T

A network based on the 10Base-T standard uses unshielded twisted-pair cables, 
providing an economical solution to networking by allowing the use of existing 
telephone wiring and connectors. The RJ45 connector is used with the 10Base-T 
standard. 10Base-T has a maximum length of 100 meters.

2.7.2  100Base-TX

The V7865 also supports the 100Base-TX Ethernet. A network based on a 

 

100Base-TX standard uses unshielded twisted-pair cables and an RJ45 connector. 
100Base-TX has a maximum length of 100 meters.

2.7.3  1000Base-T

The V7865  supports GbE offering speeds of 1000 Mbit/s. It is fully compatible 
with existing Ethernets, as it uses the same CSMA/CD and MAC protocols. 
1000Base-T has a maximum length of 3000 meters using Single-mode Fiber-Optic 
cables.

2.7.4  Boot ROM BIOS

The V7865 supports booting on the front panel GbE ports using a ROM Ethernet 
BIOS. Refer to 

Appendix C: Remote Booting

 for more information on remote 

Ethernet booting.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for V7865 Series





















































































Reviews:

No comments