Display
Action
Step
Enter the calibrated value of the cell path length if
available, press OK. The cell type must always be set
before the calibrated cell path length.
5
Setting run and end timers
Display
Action
Step
Select menu
RunTimer End Timer,
, press
OK
.
1
Set run time, press
OK
to select action. Choose the
Run
mode time 1 minutes to 999 minutes. Timer is
disabled if set to 0. If timer is enabled by
OK
, the re-
maining minutes to run are shown.
2
Set end time, press
OK
to select action. Choose the
End
mode time 1 minutes to 999 minutes. Timer is
disabled if set to 0. If timer is enabled by
OK
, the re-
maining minutes to run are shown.
3
Press
Esc
key to return to the
RunTimer End Timer
menu which now shows the countdown time and
end time.
4
Setting unit number
For service use only.
Monitor UVis-920 Operating Instructions 29055049 AD
49
5 Operation
5.8 Setup menu
