GE TruSat, User Manual

Page: 14 / 43

TruSat User’s Guide
2–2
Connectors
WARNING: When you connect equipment to the monitor, you are configuring
a medical system and are responsible for ensuring that the system complies
with IEC 60601–1–1 and with local requirements. Connect only external
devices specified for use with this monitor.
WARNING: Use only sensors and cables specified for use with this monitor.
Failure to do so may cause interference with the measurement or result in
increased emissions, decreased immunity, or damage to the equipment or
system.
Figure 2-2. Monitor connectors
Information label and symbols
A label on the underside of the monitor contains the model number, serial number, date
of manufacture, and other information about the monitor. The following symbols also
appear on this label and/or on the packaging for the monitor:
Sensor connector; defibrillation-proof
type BF applied part DC current
RS-232 connector (Trend Download
option)
Manufacturer
Power supply connector; external
power in
Other symbols on the monitor or the screen are described in the appropriate sections of
this manual.
Sensor connector
Connect an
sensor or cable only.
Trend Download connector (RS-232)
Connect the TruSat printer or PC cable. See
Trend Download option later in this manual.
Power connector
Plug the power supply cable into this connector. Then, plug the
power cord into the power supply and into the AC power outlet.