manualshive.com logo in svg

GE Telligence Patient-Staff Communications System, Operation Manual

Share
Download
GE Telligence Patient-Staff Communications System Operation Manual Download Page 113

Chapter 5 

Staff/duty stations 

Telligence Patient-Staff Communication System Operation Manual 

107 

smoke detector that activates, the call station places a high-priority 
room alarm nurse call. When the smoke detector alarm ends, the 
high-priority nurse call clears. 

1.  Press the Call button (or pull the optional cord) on the call 

station to send a staff normal call to staff consoles and 
annunciators. 

Pressing the Call button (or pulling the cord) causes the 
following to happen: 

•  lights by the station‘s Call button and by any linked Call 

buttons turn on to confirm nurse call placement. 

•  The call assurance tone sounds at any associated patient 

or staff/duty station. 

•  Associated corridor and zone lights show a Input (shown 

without pull cord) steady white. 

•  Tones sound at staff consoles and unit annunciators, and at 

stations with staff follow active. 

•  A staff normal nurse call row appears on the Call screen on 

staff consoles and unit annunciators. 

Note: 

A staff normal call is cleared from the system when a staff 

member answers the call at a staff console or annunciator. 

2.  To cancel a call from the model HC-PB2-CALLIN call station (that 

was not already cleared by a staff member answering the call), 
press Cancel on the originating call station, or a linked Cancel 
button on any associated patient or staff room station. 

•  Call button lights extinguish 

•  Dome lights extinguish. 

•  Tones stop sounding at staff consoles and annunciators, 

and at stations where staff follow is active. 

•  The nurse call row disappears from staff consoles and 

annunciators. 

If the nurse call had a reminder set for it, the following happens 
when the Cancel button is pressed: 

•  Dome light display of the staff level reminder ceases. 

•  The reminder row disappears from staff console or 

annunciator Reminders screens. 

Call stations with relay 

The model HC-PB2-CALLR call station is a generic nurse call station. 
This station may be equipped with a pull cord, may be a standalone 
station, or may be associated with a patient or staff/duty station. 
The call station may be installed in patient rooms or other rooms 
where patients are temporarily located, such as exam or recovery 
rooms. It may also be located in staff rooms. The station, which 

Summary of Contents for Telligence Patient-Staff Communications System









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands