GE SIMON XT Installation Manual Download Page 47

Page: 47 / 63

Testing

This section describes how to test the system.

Control panel

Test the panel by pressing the buttons as described in Table 25 below. Table 26 below
provides a list of the arming levels.

Note:

An access code is required when arming if the secure arming option is on.

Table 25: Control panel test sequence

Button

Function tested

Test

Correct result

Doors+Windows

The panel arms door
and window sensors.

Press Doors+Windows a
second time to eliminate the
programmed entry delay.

The button will blink
when the no entry delay
option is on.

Motions

The panel will arm
motion sensors.

Press Motions a second time
to turn the latchkey option on.

The button blinks when
latchkey is on.

Disarm

The panel will prompt
you to enter an access
code.

Enter the appropriate code.

The panel will disarm
doors, windows, and
motion sensors.

Status

Press Status for panel to
display and speak the system
status.

Police

Fire

Emergency

Press and hold or press the
button twice quickly to
activate a nonmedical police,
fire, or auxiliary emergency
alarm.

Note:

Forty key presses for invalid codes (ten invalid 4-digit codes, for example) will

cause a system access alarm. The alarm locks all touchpads, except key fobs, for 90
seconds.

Table 26: Arming levels

Arming
level

Description Indication

Subdisarms (master access and
duress codes only), and bypasses 24-
hour intrusion sensors (master access
code only). Fire sensors (group 26)
cannot be subdisarmed.

One beep indicates the system is subdisarmed.
The panel displays and speaks “Subdisarmed”. The
Disarm button blinks.

Disarm the system.

One beep indicates the system is disarmed. The
panel displays and speaks Disarmed. The Disarm
button lights.

Simon XT Installation Manual

Summary of Contents for SIMON XT
































































Search results

Summary of Contents for SIMON XT

Reviews:

Related manuals for SIMON XT

Brands by name

Popular brands

GE SIMON XT, Installation Manual

Search results

Summary of Contents for SIMON XT

Reviews:

Related manuals for SIMON XT

Brands by name

Popular brands