Set clock
If the panel loses both AC and battery power, then upon restoring power the system
time will default to midnight and blink, indicating it has not been set correctly. Your
installer can set your system time to display in either 12-hour or 24-hour format.
Time of day format is HH:MMx, where:
HH = 01 to 12 (12-hour format) or 00 to 23 (24-hour format)
MM = 00 to 59
X = a or p (12-hour format) or none (24-hour format)
To reset the clock:
1. Scroll until the display shows
Set Clock
, and then press OK.
The display shows
Enter Code
.
2. Enter your master code with the numeric keys, and then press OK.
3. Press OK again.
The display flashes the hours.
4. Scroll to set the hours, and then press OK.
The display flashes the minutes.
5. Scroll to set the minutes, and then press OK.
The display flashes am/pm.
6. Scroll to set the am/pm, and then press OK.
The display shows the current time and stops flashing.
7. Press Status twice to exit.
Set date
If the panel loses both AC and battery power, then upon power restoral the system
date will reset.
Date format is YYYY-MM-DD, where:
YYYY = year
MM = month
DD = day
To set the date:
1. Scroll until the display shows
Set Date
, and then press OK.
The display shows
Enter Code
.
22
Simon XT V2 User Manual
