RHM 12
The RHM 12 can measure flow rates up to 100 kg/
min (220 lb/min) with temperatures in excess of
350°C and pressures up to 331 bar. This model is
truly a versatile solution, manufactured by GE’s
Rheonik mass flowmeter experts.
Applications
• General control • Dosing
•Mixing
• Batching
• Injections
• Filling
Features
• Flow uncertainty down to 0.12%
• Density uncertainty down to 0.5%
• Repeatability better than 0.05%
• Unique torsion oscillator
• Typical measuring ranges from 1 to 100 kg/min
• Minimal flows as low as 0.75 kg/min
• Optimized solutions for batching operation
• Customization possible
• Extra compact design with minimal space
requirement
• Hazardous Area Approvals (ATEX, CSA, ...)
Standard 1 inch Coriolis
Mass Flowmeter
Advantages
• Torsion oscillator design assures most stable and
basically drift free measurement and increased
signal to noise ratio
• Not sensitive to changes in pressure
• Longest life time and increased safety - low stress
in welds and increased wall thickness against
abrasion
• No moving parts, practically no maintenance
• Removable connection manifold available
GE
Measurement & Control
g
