49-2000315 Rev. 3
9
Using the Clock and Timer
USING THE RANGE:
Using
the
Clock
and
T
imer
Throughout this manual, features and appearance may vary from your model.
You have the choice of having the timer show the time
counting down or the time of day. In either case, the
timer will signal at the end of the timer period to alert you
that the time is up.
To Set the Clock
NOTE:
When you first plug in the range or after a power
failure, the entire Clock/Timer display will light up.
1.
Press the
Clock
pad.
2.
Press and hold the
+
or
–
pad and the time of day
will change 10 minutes at a time. To change the
time by single minutes, give the pads short taps.
3.
Press the
Clock
pad to start the clock.
To Set the Kitchen Timer
1.
Press the
Kitchen Timer On/Off
pad.
2.
Use the
+
and
–
pads to set the timer. Short taps on
the
+
or
–
pad change the timer’s setting one minute
at a time. Pressing and continuing to hold the
+
pad
increases the setting 10 minutes at a time.
3.
Once you have set your timer, press the
Kitchen
Timer On/Off
pad to start timing.
As the timer counts down, a signal will indicate
when one minute is left. After this signal, the display
will count down in seconds. When time runs out, a
final signal will sound. Press the
Kitchen Timer On/
Off
pad to stop the signal.
To Change or Cancel the Kitchen Timer Setting
When the timer is counting down, use the
+
and
–
pad
to change the remaining time, or press the
Kitchen
Timer On/Off
pad to stop the timer. The timer cannot
be cancelled unless you have fully completed “set timer”
instructions above.
Display Clock While Kitchen Timer Is Operating
Pressing the
Clock
pad while the timer is operating will
not interfere with the timer’s operation; the display will
change to show the clock, but the timer will continue to
count down and will still signal when time is up. Press
the
Kitchen Timer On/Off
pad again to change the
display back to show the timer.
