(continued)
How to Remove the Storage Drawer or
Panel to Clean Under the Range
The area under the range can be reached easily for
To clean under models with a
cleaning by removing the bottom drawer (on some
front kick panel, remove the
models).
To
remove, pull the drawer out all the way,
panel by pulling it straight out
tilt
up the front and remove it. To replace, insert glides
at the bottom. To replace the
at the back of the drawer beyond the stop on range
panel, first hook the top tabs on
glides. Lift the drawer if necessary to insert easily.
and then the bottom tabs.
the front of the drawer down, then push in to close.
Control Panel and
Clean up any spills or spatters with a damp cloth.
Remove heavier soil with warm, soapy water.
Clean control panel with mild liquid dish detergent
and a soft cloth. Rub control panel lightly.
CAUTION: Do not use abrasives of any kind on the
control panel. The lettering on models with touch
pads is sensitive to abrasives and pressure.
The control knobs may be removed for easier
cleaning. To remove knob, pull it straight off the stem.
Wash knobs in soap and water but do not soak.
Oven Vent
The oven is vented through an opening under the right rear surface unit.
Never cover the opening with aluminum foil or any other material. This
would prevent the oven vent from working properly.
Oven
Vent
1’
Painted
Painted surfaces include the outside oven door, sides,
Do not use commercial oven cleaners, cleansing
control panel and drawer front. Clean these with soap
powders, steel wool or harsh abrasives on any
and water or a vinegar and water solution.
painted surface.
Glass
To clean the outside glass finish,
use a glass cleaner.
Rinse and polish with a dry cloth. Do not allow the
water or cleaner to run down inside openings in the
glass while cleaning.
Metal Parts
Do not
use steel
abrasives, ammonia or
commercial oven cleaners. To safely clean surfaces;
wash, rinse and then dry with a soft cloth.
26
