GFK-2306E
Chapter 4 Detailed Operation
4-25
4
2.
Select a
connection and choose
Properties. The Built-in
Ethernet Port Settings dialog box appears.
6. Select a method:
Obtain an IP address via DHCP
(automatic).
Specify an IP address
(manual).
7. Enter the
IP Address, Subnet Mask
and
Default Gateway
numbers
obtained from your network administrator (manual method only).
8. Tap
OK
.
9. To save the settings, run the
Backup
utility. (See page 2-10.)
If the DHCP method was selected, the network server will assign an IP
address while the QuickPanel View is initializing. (You must be
connected to the network).
After setting an IP address for the QuickPanel View, you can access
any network drives or shared resources for which you have permission.
Summary of Contents for QuickPanel+ IC754VSI12CTD
Page 4: ......
