GE QuickPanel+ IC754VSI12CTD, Operator Interface Products

Page: 29 / 96

2-16 12" QuickPanel* View Intermediate, Color and Monochrome
– December 2010
GFK-2306E
2
To change project update settings
This utility can be configured to change the way the Machine Edition project
update will occur.
1. Tap Start, point to Settings and then tap Control Panel.
2. In the Control Panel, double-tap Project Transfer to configure the
RestorePCCard utility settings.
3. Select from the list which option you wish to use:
Wait for Answer
This is the default setting. If an update image is present, the user will be
prompted to install this update as described above. If the update dialogs are
not closed, the unit will not complete the boot cycle.
Always Restore
With this setting there will be no prompts to confirm installing the update (if
one is present). The update will occur as though the user selected the
option to install the update.
Note: If more than one update is found due to multiple flash devices
having valid update images, the user will still have to select which
image to use. For fully automatic updates, ensure there is only one
update image present.
Skip at Startup
With this setting, all update images are ignored during the boot.