– 8 –
(
Continued next page
)
Your control will allow you to lock out the touch
pads so they cannot be activated when touched.
NOTE:
On double oven models, this activates the
feature for both ovens.
To lock/unlock the controls:
Touch the
CLEAR/OFF
pad for
3 seconds, until the screen shows
CONTROL LOCKED OUT
.
To unlock the control, touch the
CLEAR/OFF
pad for 3 seconds, until
the home screen appears.
When this feature is on and the touch
pads are touched, the control will beep
and the display will show
CONTROL
LOCKED OUT
.
NOTES:
■
The control lockout mode affects all controls
except for the
CLEAR/OFF
pad. No other
touch pad will work when this feature is
activated.
■
The adjustment will be retained in memory
after a power failure.
Control Lockout
C
LEAR
O
FF
Option–Proof
ge.com
Proofing
The proofing feature maintains a warm
environment useful for rising yeast-leavened
products.
Place in the oven on rack B or C
and, for best results, cover the
dough with a cloth.
Touch
OPTIONS
.
Touch
PROOF
.
The oven interior light turns on and then
will cycle during proofing.
The proofing feature automatically
provides the optimum temperature for
the proofing process, and therefore does
not have a temperature adjustment.
For double oven models only,
touch
UPPER OVEN
or
LOWER OVEN
to
select the desired oven.
Touch
START
.
Set the
KITCHEN TIMER
for the
minimum proof time.
When proofing is finished, touch
CANCEL
.
■
Proofing will not operate when oven is above
125°F. “OVEN IS TOO HOT” will show in the
display.
■
It is not necessary to preheat the oven for
proofing.
■
To avoid lowering the oven temperature and
lengthening proofing time, do not open the
oven door unnecessarily.
■
Check bread products early to avoid
over-proofing.
NOTE:
Do not use the proofing mode to reheat
cold food or to keep hot, cooked food warm. The
proofing oven temperature is not hot enough to
hold foods at safe temperatures. Use the
WARM
feature to keep hot food warm.
OR
O
PTIONS
P
ROOF
K
ITCHEN
T
IMER
U
PPER
O
VEN
L
OWER
O
VEN
S
TART
C
ANCEL
Note:
The convection fan and the lights are operating during this function.