– 27 –
Press inward on the 2 tabs and release the
auger motor assembly wire harness receptacle
from the evaporator fan plenum.
19.
Remove the 4 hex-head screws that hold the
evaporator fan plenum in place (Fig. 1 and
Fig. 2).
20.
Note:
The bottom hex-head screws are hidden
under the bottom of the evaporator fan plenum.
Fig. 1
Fig. 2
Top Hex-head Screws
Bottom Hex-head Screws
Unclip the evaporator thermistor and ground
wires from the evaporator.
Remove the two ¼-in. hex-head screws from
the fan bracket.
21.
22.
Peel back the tape then slide out the wiring
grommets from the fan bracket.
Remove the fan bracket.
23.
24.
Ground Wires
Thermistor
Grommet
(1 of 2)
